AMB-L
ENERPAT
 | ENERPAT Heavy-Duty Scrap Metal Baler The ENERPAT AMB-L Series is a versatile hydraulic scrap metal baler, also called a hydraulic metal baler machine or metal scrap compactor. Where the hopper-fed AMB-H is built for continuous feeding of light material, the ferrous baler AMB-L's lid design makes it the better choice for bulky, high-hardness, and mixed-composition scrap: coiled steel, rebar, appliance casings, car shells, paint drums, and aluminum profiles. Main cylinder press force runs from 100 to 1,500 tons and motor power from 30 to 300 kW, built on Schneider electricals and ENERPAT's own hydraulic cylinders and control system. The lid covers the top of the compression chamber, so loading stays straightforward even with irregular scrap, and blades along the chamber and platen edges shear long material cleanly during the press stroke. This baler for scrap metal is widely used by recyclers, steel mills, non-ferrous smelters, and electronics, appliance, and aluminum profile manufacturers. |
Operating Principle
Material Feeding:
Materials are transported to the metal baler's compression chamber using forklifts and unloading devices.
Hydraulic Compression:
Under the drive of the hydraulic system, waste metal is compressed into compact metal bundles.
Automatic Bundle Ejection:
The metal bundles are automatically pushed out through a small door using a hydraulic cylinder.
Product Specification Sheet
The AMB-L range spans 100-1,500 tons of press force and 30-300 kW motor power across different standard configurations (see spec table below), with compression chambers from 1200×700×600 mm up to 2500×2000×1200 mm.
Match your typical scrap piece size to the chamber dimensions first. Oversized material that won't sit flat in a smaller chamber is the most common reason to step up a size. Contact us to send us your monthly volume and material mix, and we'll confirm the right model with a free material test before you order.
| Model | AMB-L1270-125 | AMB-L2014-250 | AMB-L1812-200 | AMB-L2014-250 | AMB-L2520-250 | AMB-L2520-315 |
| Press Force | 125 T | 250 T | 200 T | 250 T | 250 T | 315 T |
| Press Chamber | 1200x700x600 mm | 2000x1400x900 mm | 1800x1200x800 mm | 2000x1400x900 mm | 2500x2000x1200 mm | 2500x2000x1200 mm |
| Motor Power | 15 kw | 2x22 kw | 2x22 kw | 2x22 kw | 2x30 kw | 2x45 kw |
| Pump | 63 m/r | 2x160 m/r | 2x160 m/r | 2x160 m/r | 2x160 m/r | 2x250 m/r |
| Bale Size | 300x300 mm | 500x500 mm | 400x400 mm | 500x500 mm | 500x500 mm | 600x600 mm |
Material Testing
Metal scrap baling machine AMB-L is built for dense, high-hardness, hard-to-compress ferrous and non-ferrous scrap.
Not sure your material is a fit? We test customer-supplied samples free of charge before you order: Request Material Testing
| Supported Materials: | Target Applications： |
|
|
 |  |
 |  |
 |  |
Hastir Joachim
"Since introducing the ENERPAT lid-type scrap metal baler, our production efficiency has significantly improved. The machine operates stably with a low failure rate, greatly saving maintenance time and costs. The lid design makes operation more convenient, and the quality of the bales is uniform, making it ideal for our recycling industry needs. The after-sales service is prompt, and the team is professional; overall, we are very satisfied!"
Menzi Gama
"The ENERPAT lid-type scrap metal compactor performs exceptionally well at our large solid waste disposal center. The machine has strong processing capabilities, efficiently handling large volumes of solid waste materials and significantly improving our work efficiency. The intelligent control system is simple to use, allowing employees to quickly get up to speed and reducing training costs. Additionally, the durability and stability of the equipment ensure worry-free long-term operation, making it the preferred choice in the field of solid waste management!"
Learn more about our client case studies.
English